Note: This message is displayed if (1) your browser is not standards-compliant or (2) you have you disabled CSS. Read our Policies for more information.
A Quality Assurance Project Plan, or QAPP, is a written document outlining the procedures a monitoring project will use to ensure the data it collects and analyzes meets project requirements. A QAPP helps the data user and monitoring project leaders ensure that the collected data meet their needs and that the quality control steps needed to verify this are built into the project from the beginning. By law, any EPA-funded monitoring project must have an approved QAPP before it can begin collecting samples. The purpose of this requirement is to ensure that the data collected by monitoring projects are of known and suitable quality and quantity. Below are documents, templates, and guidance that will help in the development of a QAPP for nonpoint source monitoring projects funded by IDEM.
All projects developing a QAPP should use this template:
Technical instructions on how to use the required template:
This document is used by IDEM staff when reviewing a project QAPP to ensure completeness, accuracy and feasibility:
This document provides a list of parameters that are currently being collected by watershed groups throughout Indiana. Each parameter has a list of analytical methods and descriptions to assist projects in selecting the method best for each monitoring program:
The following data template worksheets provide guidance to insure that projects are collecting all the information needed for IDEM to evaluate and assign data use. Additionally, the spreadsheets are in the correct format for the Assessment Information Management System (AIMS) database to accept the information to define projects, assign unique numbers, and collect data results along with quality information.
The site information worksheet requires projects to collect the appropriate sample site locations for the NPS staff to set up the projects into our data collection program.
The sampling spreadsheets require projects to enter their results and other information associated with their results. An informational sheet is also included in each file. The last template contains required information for lakes data.
For further assistance, contact the QA Manager.