IN.gov - Skip Navigation

Note: This message is displayed if (1) your browser is not standards-compliant or (2) you have you disabled CSS. Read our Policies for more information.

Compliance and Technical Assistance Program

CTAP > Fiber Reinforced Plastic Manufacturing Fiber Reinforced Plastic Manufacturing

IDEM’s Fiber Reinforced Plastic Manufacturing Program uses the collaborative efforts from the past in order to set up today’s framework. The Composite Fabricators Association (CFA) (now the American Composites Manufacturers Association (ACMA)) worked with the Office of Air Quality in developing factors for open molding systems. These adjusted factors, along with the revised state rules and the new federal HAP rules, provide the backdrop for making these calculations. The adjusted factors from 2001 are the most updated factors.

Additionally, the Compliance Technical Assistance Program (CTAP) may be contacted at (800) 988-7901 for confidential assistance. A CTAP consultation request can be made as well.

Compliance Assistance Resources