Note: This message is displayed if (1) your browser is not standards-compliant or (2) you have you disabled CSS. Read our Policies for more information.
INSafe's free consultation program offers Hoosier employers a voluntary approach to designing and implementing effective safety and health management systems. By building upon employee-management participation in an onsite hazard assessment, consultation can bring workers and employers together to develop and implement programs to control hazards and prevent worker injuries and illnesses. Through pooled resources and periodic self-inspections, employers and employees together work to make their job sites safer.
INSafe consultation services operate independently from the Indiana Occupational Safety and Health Administration (IOSHA). An INSafe Safety or Health Consultant will visit your workplace or job site at your request to provide the service(s) you have chosen. The consultant will not issue citations, impose penalties or issue fines for violations of federal or state statutes that may be found during the consultation visit. Although a consultant cannot guarantee your workplace will "pass" a federal or state inspection, it has been demonstrated that a consultation visit will significantly reduce the citation or penalty impact of future inspections.
The consultant will not provide the name of your company, its owner(s) or any other information about your workplace to IOSHA, provided the employer agrees to correct all serious hazards identified during the onsite consultation visit. Requests for consultation services will not initiate a federal or state occupational safety and health enforcement inspection.
An onsite visit from an INSafe Safety or Health Consultant is just a click away. Click here to request an onsite consultation.
Step #1: Request
Your request for an INSafe onsite consultation must be in writing. You may complete the online request form by clicking here. Upon receipt of your request, you will receive confirmation of your request as well as a tentative date in which the consultation is scheduled.
Step #2: Onsite Visit
During the visit, you or your designated representative will participate in an opening conference. During the opening conference, the INSafe Consultant will review your OSHA injury and illness logs for the last three calendar years, calculating your injury and illness rates and review your written safety and health programs (i.e. Emergency Action Plan, Hazard Communication, Lockout/Tagout, etc). The consultant will also conduct a hazard walk-through of the facility or job site. He or she will indicate occupational safety and health hazards identified during the course of the walk-through. Also, during the walk-through, the consultant may conduct interviews with employees. Once the walk-through is completed, the consultant will conduct a closing conference. During the closing conference, the consultant will review safety and health hazards noted, and work with the employer to establish reasonable correction due dates.
Step #3: Evaluation and Report
A written report detailing all onsite consultation findings and recommendations, including methods to improve your safety and health program, will be prepared and sent to you. The employer is required to post the hazard list transmitted in the written report. These must be posted near the hazard and for a minimum of three days or through correction (whichever is longer).
Step #4: Correction of Serious Hazards
Your written report will provide written notification of hazards identified by the consultant as well as provide correction due dates. Extensions of the hazard correction dates may be granted if requested in a timely manner. To be eligible for an extension, the employer must provide adequate interim protection to employees to safeguard against the hazard.
Step #5: Hazard Correction Documentation
Employers must provide written confirmation, including the date and method of hazard correction. If necessary, INSafe may schedule a follow-up consultation visit to provide technical assistance or verify hazard correction.
Many of the OSHA standards require written safety and health programs to ensure complete, site-specific and uniform compliance with the requirements. For available programs from INSafe click here. Employers must tailor or customize written programs to meet their specific needs. Some may be retrieved from this website, while others may be emailed or mailed to you by contacting our office at firstname.lastname@example.org. In addition, other sample written programs are available online from federal OSHA.
In addition to the onsite consultation services provided by INSafe, the division also provides technical guidance and support in addressing occupational safety and health questions or concerns. This can be accomplished by phone or by visiting our central office located at 402 West Washington Street, Room W195, Indianapolis, Indiana. This assistance is not a substitute for an onsite consultation. It is designed to answer specific occupational safety and health questions. INSafe is unable to guarantee compliance with occupational safety and health standards or certify an employer will "pass" a subsequent IOSHA inspection.
To have an INSafe Safety or Health Consultant visit your facility to review or assess a particular operation, program, conduct noise measurements or perform air sampling, please complete the online consultation request form available here.
Questions about onsite consultation or occupational safety and health, may be directed to an INSafe Safety or Health Consultant by emailing email@example.com or phoning (317) 232-2688.